Doctor Blades Basics | CTS Industries
Anilox Rollers
Anilox Rollers

Our Mission Statement

Quality through technology, and Innovation through specialization, has been our specialty since 1980

Contact Us

408 2nd St
Cedartown, GA 30125
(770) 748-3497
Daily Hours: 8AM-5PM EST
770-748-3497
1-800-334-7117 USA & CANADA
Top

Doctor Blades Basics

CTS Industries / Doctor Blades Basics

Doctor Blades Basics

Flexographic printing presses use both anilox roller and doctor blade inking systems. These components are crucial for printing systems. There are several different types of doctor blades that you can use, but the best choice is dependent on the application. Just remember: anilox rollers do not require a lot of pressure from the blade. In general, a thinner blade edge allows for a clean result. An important thing to point is that the blade life is directly impacted by cell structures/types and the overall thickness of the anilox blade.

NOTE: The following are just a few examples of what the industry has to offer. If you would like to look at more feel free to check out the resources over at Daetwyler.

 

Doctor Blade Examples:  

Round Edge
  • Strong, rigid, precise, and polished edge
  • Resilient
  • Fast and accurate
Bevel Edge
  • Consistent print quality
  • Rigid tip design
  • Several arrangements for this type.
Lamella Edge (stepped)
  • Area is in constant contact
  • Streak-less
  • An industry standard
Double Stepped
  • Reduces vibrations
  • Consistent ink metering
  • Reinforced

 

Blade wear can have three different causes: abrasion, fatigue, and corrosion. The doctor blades used in flexo are very similar to the ones used in gravure printing. Doctor blades used in flexographic presses remove excess ink from the surface of the anilox roller that applies ink to the printing plate. Doctor blades are very effective when it comes to ink metering. Doctor blades are arguably more effect than traditional fountain roller arrangements. Be sure to follow our blog for a more detailed look at this claim. We will be examining the pros and cons of doctor blades vs doctor rollers in a future post. See our main blog page and don’t forget to request a quote.

 

The list of materials these blades are made from includes carbon steel, alloy steels, stainless steel, ceramic, plastics, and composites made from fiberglass and carbon fiber. It is very important to ensure the blade used is applicable to your needs.

In addition to offering the range of materials for the blades themselves, Doctor Blades come in a variety of tip types to promote efficient ink metering.

If your job calls for the thicker blades to be used it is important to note these blades increase the blade angle because they deflect less ink in the metering process.  These thicker blades boast a wider area and spread the solution. This can be a great benefit and contribute to a more complete metering process.  Make sure to change the doctor blade after every job. We recommend that you change your doctor blades after every shift change. Be sure to handle them with care!

 

References

Allison Blades. (2011, June). Retrieved from https://www.allisonblades.com/wp-content/uploads/sites/4850/2017/05/FLEXO_June2011.pdf

Flexo Concepts. (n.d.). Flexo Concepts. Retrieved from https://www.flexoconcepts.com: https://www.flexoconcepts.com/tag/doctor-blade-chamber/

Flexo, T. (n.d.). Retrieved from https://www.teamflexo.com/products/daetwyler-doctor-blades/

Flxon. (n.d.). Retrieved from http://www.flxon.com/

Mark Andy. (n.d.). Retrieved from https://www.markandy.com/supplies/flexo-printing-supplies/doctor-blades/

Printwiki.org. (n.d.). Retrieved from http://printwiki.org/Doctor_Blade

No Comments

Sorry, the comment form is closed at this time.